Leetro 6515 to ruida 6442g

Machine: lc1824 leetro 6515

Board: ruida 6442g

Firmware: I have a new board and I’m using whatever it came with" is also a great answer!_

Problem/
Hi im new here and a new owner of an old lc1824 100w c02 laser. Its the first laser ive got and i have only used it once without the leetro usb bungee(last owner lost it somehow) with an file in the laser so i know it fires. I didnt want to buy the bungee and use lasercut and leetro because ive read some pretty nasty stuff about the board and software. I got my ruida board and controller today and started the switch but im strugling with the conections because there are some odd conections on the old leetro that i dont understand how i should connect them to the ruida board.

Sorry for the werry poor english and i hope someone could help me with this.

At the moment i dont know what to do with these connections.

5v/24v goes to x axis reverse and forward limit
And same on the y axis. Any clues how wire this on the ruida?

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.