HELP NO work

Machine: K40 M2

Board: _mini

Firmware: _ “I have a new board and I’m using whatever it came with” is also a great answer!_

Problem/ Question: _Got board installed okay Lights came on saying all was. okay. then minutes as i was trying to find board in light burn. i looked over and just one steady red lightIMG_0551

Hi Michael, thanks for the photo. The first thing I noticed was that you appear to have a 4 pin connector (the smaller white one with white, yellow, blue, red wires) stuck into the 5 pin K40 Endstop Connector on the board.

If that is the connector for your Y stepper, you need to unplug that and plug it into the white connector on the board labeled Y. (It’s on the bottom of the board the way your photo is oriented.)

Before you do that it might be worth disconnecting everything and then powering it up to make sure nothing has been damaged by putting a cable in the wrong place.

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.