Changing config.txt file to match my old GRBL 1.1f CNC machine

I need to transfer the GRBL config info from my old machine. I’ve looked at the config.txt on the SD card that came with my Cohesion3D board but don’t see a way to do this.
My GRBL config:
$0=10
$1=255
$2=192
$3=110
$4=0
$5=0
$6=0
$10=3
$11=0.050
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=3
$24=200.000
$25=1500.000
$26=250
$27=2.000
$30=1000
$31=0
$32=0
$100=44.430
$101=44.430
$102=315.000
$110=5000.000
$111=5000.000
$112=500.000
$120=250.000
$121=250.000
$122=50.000
$130=290.000
$131=290.000
$132=100.000
Thanks for the help.

Did you get this sorted out?

Sorry to say no I didn’t. I can’t be the only one with this problem. I was surprised I didn’t get an answer.

Maybe this topic can help. You can also look at the document page

Sorry, it’s been a busy couple of weeks. I saw this post and started to write a reply and got distracted. I’ll see if I can come up with something tomorrow and let you know. It should be a simple matter of mapping values to config settings - start with the configuration guide for GRBL and the configuration guide for Smoothie and change the parameters with the same descriptive names to the same values (and adjust for units as necessary).

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.